Skip to main content

​
Run a speeding violations report

The Speeding Violations report produces a consolidated table of every speed violation recorded across your fleet, showing severity, vehicle, driver, duration, and location. Use it to identify repeat offenders, audit a specific vehicle, or prepare documentation for safety reviews.

​
Before you start

  • Dispatcher or admin role required.
  • Speed alerts must be configured for at least one vehicle. See Configure a speeding alert.
  • Violations are only captured while a DataLogger device is connected and reporting.

​
Steps

  1. In the Servinix portal, select Reports from the left navigation under Management.
  2. Under the Safety section, find the Speeding Violations card.
    • The card description reads: “Consolidated speeding violations table with severity, vehicle, driver, duration, and location.”
  3. Click CSV on the Speeding Violations card.
  4. In the report configuration screen, set your filters:
    • Date range — choose the start and end dates to review.
    • Vehicle(s) — filter to a single vehicle or select all.
    • Driver — optionally narrow to a specific driver.
    • Severity — optionally filter by violation severity level if available.
  5. Click Generate (or Download) to export.
  6. The CSV file downloads automatically.

​
Result / verify

The downloaded CSV contains one row per speeding violation. Columns include:
  • Severity — the violation level (e.g., low, medium, high) based on how far over the speed threshold the vehicle travelled.
  • Vehicle — the vehicle name or ID.
  • Driver — the driver associated with the vehicle at the time.
  • Duration — how long the vehicle remained above the threshold.
  • Location — the GPS coordinates or street address where the violation occurred.
An empty report means no violations were recorded in the selected period — either no speeding occurred, or speed alerts are not yet configured.

​
Troubleshooting

Violations you expected are missing — Confirm speed alerts are set up for the vehicle. Go to the Alerts settings and check that a speed threshold is active for the relevant vehicles. See Configure a speeding alert. Driver column is blank — Driver assignment is tied to how the vehicle was dispatched in Servinix. If no driver was assigned, the column remains empty.