> ## Documentation Index
> Fetch the complete documentation index at: https://helpdocs.servinix.com/llms.txt
> Use this file to discover all available pages before exploring further.

# View the live fleet map

> Open the Servinix fleet map at /live (or beta /livev2) to see real-time vehicle and technician locations, with both classic Live and Live v2 variants.

# View the live fleet map

Open the Live page to see where every vehicle and technician is right now on a real-time map. The page refreshes automatically so you always have a current picture of fleet activity.

## Before you start

* You need a Servinix account with the GPS Tracking module enabled.
* Vehicles must have a DataLogger device installed and reporting data. If a vehicle shows no location, see [Verify device connection](/gps-tracking/device-setup/verify-device-connection).
* Dispatchers and admins can view all assets. Technicians see their own location through the mobile app.

## Steps

1. Sign in to the Servinix portal.
2. In the left navigation, select **Live**. The page title is **Fleet Command - Live Tracking**.
3. The map opens showing your coverage area. The panel on the left shows two tabs:
   * **VEHICLES** — count of active vehicles reporting position.
   * **TECHNICIANS** — count of technicians currently on shift.
4. Select the **VEHICLES** tab to see vehicle markers on the map, or select **TECHNICIANS** to switch to technician markers.
5. Active geofence zones are shown on the map. The panel labels them by name — for example, **DOWNTOWN**, **WEST SIDE**, **INDUSTRIAL PARK** — next to the **ACTIVE GEOFENCES** heading.
6. To zoom in on a specific area, scroll or pinch the map. Select any marker to open vehicle or technician detail.

### Live v2 (FSM-parity sandbox)

The navigation also shows a **Live v2** link. This opens the same live map surface (`/livev2`) built to FSM-parity standards. The Live v2 panel lists individual assets by name and shows when a device was last active ("Device dark since…"). Use Live v2 when testing updated FSM workflows — the data source is the same as the classic Live view.

## Result / verify

The map shows colored markers for your vehicles and technicians. The VEHICLES and TECHNICIANS counts in the panel reflect the assets currently tracked. If counts read 0 and you expect active assets, check that the DataLogger device is powered and connected (see [Verify device connection](/gps-tracking/device-setup/verify-device-connection)).

## Troubleshooting

* **Map loads but no markers appear.** The vehicle count may be 0 because no devices are actively reporting. Confirm device LEDs and connection status.
* **A specific vehicle is missing.** The device may not have reported recently. Open the Resources page to see each vehicle's last ping time.
* **Geofence zones are not visible.** Zones only appear when at least one geofence has been created. See [Manage fleet geofences](/gps-tracking/alerts/manage-fleet-geofences) to set them up.

## Related

* [View a vehicle's detail and status](/gps-tracking/live-tracking/view-vehicle-detail)
* [Verify device connection](/gps-tracking/device-setup/verify-device-connection)
* [GPS alerts overview](/gps-tracking/alerts/gps-alerts-overview)
* [View your daily schedule](/field-service-management/scheduling-and-dispatch/view-your-daily-schedule)