> ## Documentation Index
> Fetch the complete documentation index at: https://helpdocs.servinix.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Vehicle showing wrong location

> Steps to investigate and resolve inaccurate GPS position reports on the Servinix fleet map, including device placement, GPS lock, and map data refresh.

# Vehicle showing wrong location

A vehicle on the fleet map is pinned to the wrong address, stuck at an old position, or jumping between locations that don't match where the vehicle actually is.

## Why this happens

* The map is displaying the **last known position** from before the vehicle entered a no-signal area (parking garage, tunnel, rural dead zone). The pin does not update until the device reconnects.
* The device is reporting correctly but the **map tile has not refreshed** in your browser — you're seeing a cached view.
* GPS signal was weak or obstructed at the time of the last fix, causing the position to be snapped to a nearby road or a building centroid rather than the true location.
* The wrong vehicle record is associated with this device — data from another vehicle is being displayed.

## Try this first

1. **Refresh the live map.** On the Fleet > Live page, click Refresh or reload your browser. Stale browser state is the most common cause of a wrong-location display.
2. **Check the timestamp on the position.** Click the vehicle on the map to open the vehicle detail panel. Look at the "last updated" or last-ping timestamp. If it is more than a few minutes old, the vehicle is likely in a low-signal area — wait for it to move into coverage.
3. **Ask the driver for their actual location.** Compare what they report to what the map shows. If the driver is at a location the map has never shown, the device may have lost signal for an extended period.
4. **Check the Diagnostics page.** Go to Fleet > Diagnostics and find the asset. Recent "Trip Start" or "Battery Voltage Reading" events confirm the device is active. If the last event was hours ago, the device is not communicating.
5. **Confirm the vehicle-to-device pairing.** Go to Fleet > Resources and verify the device serial number associated with this vehicle record matches the device physically installed in that vehicle. A mismatch means you may be tracking a different vehicle entirely.

## If that didn't work

If the location remains wrong after a refresh and the driver confirms they are somewhere the map has never shown:

* Gather the vehicle ID, device serial number, and approximate expected location from the driver.
* Contact Servinix support. Support can query the BitBrew telemetry pipeline for the raw GPS fix data to determine whether the device is sending bad coordinates or no coordinates at all.
* If device hardware is suspected, support will evaluate whether an RMA is needed.

## Related

* view-live-fleet-map
* view-vehicle-detail
* device-not-reporting
* fleet-diagnostics